No town hall in Vander: the county desk is downtown
Vander is a census designated place in Cumberland County, east of Fayetteville and south of Eastover, with Interstate 95 forming its western edge. About 1,388 people live on 3.72 square miles at roughly 128 feet of elevation. There's no mayor and no town inspector. The permit counter is Cumberland County Building Inspections and Permitting in the Historic Courthouse in downtown Fayetteville.
Applications go through the county's self-service portal. Code Enforcement handles zoning permits as well, and the county's All Other Permits page lists the residential checklists. They cover additions, new homes, decks and porches, fences, solar and accessory buildings. There's no separate checklist for a plain driveway, sidewalk or patio slab, so for flatwork you'll need to phone the county.
Confirm early whether your parcel sits inside Fayetteville's limits or its extraterritorial area, since that can change the rules. Our permit guide compares the counters.
The 400 square foot and 12 foot line for shop and shed slabs
The county splits accessory buildings by size. A building less than 400 square feet and less than 12 feet in any direction needs the zoning permit only. A building larger than 400 square feet or longer than 12 feet in any direction also needs the building permit. Both come with a site plan or plot plan drawn to engineering scale, showing every property line and setback.
The 12 foot rule snags small projects, and as concrete contractors in Vander, NC, we catch it before the slab is poured. A 10 by 20 foot storage shed is under 400 square feet but runs longer than 12 feet in one direction, so it lands on the heavier side of the line. Settle the permit tier before you order a building kit.
If the owner and the applicant are different people, the county wants an owner affidavit. Where the lot has a septic system or a well, Environmental Health has to sign off too. We bring a tape to the site walk and mark the pad against the lines on your plot plan. Slab pricing runs $7 to $12 per sq ft. A 20 by 20 pad is 400 sq ft, so $2,800 to $4,800, settled in a free written estimate. The slab page has the thickness details.




