A town with its own zoning rules and no website
Linden is small, about half a square mile and 136 people in the 2020 Census, and it runs no website. Cumberland County's municipalities page lists it as "Town of Linden (No Website)." The county's planning department posts the Linden Zoning Ordinance, revised August 15, 2023, along with the Linden Subdivision Ordinance, so that's where the rules are read.
The ordinance's Sec. 1-108 says a zoning permit is required before the excavation for or construction of any building or structure, including accessory structures. The application needs a scale plan or plat showing the lot shape, the buildings and the use. Permits go void after six months unless real progress has been made. The ordinance names the Code Enforcement Manager as the issuer, and the county's Planning and Inspections department is where you ask how that works day to day. See our permits guide for the county's wider setup.
Three residential districts and the numbers behind them
Linden zones its homes R40, R15 and R7.5, meaning lots of 40,000, 15,000 and 7,500 square feet or more. For a principal building, R40 asks a 100 foot lot width, a 30 foot front setback from the right-of-way line, a 15 foot side yard and a 35 foot rear yard. R15 and R7.5 want a 75 foot lot width, the same 30 foot front and 35 foot rear, and side yards of 10 feet for one story and 15 feet for two.
Those are for the house. That table covers principal buildings, not accessory ones, so ask Cumberland County planning how far a detached shop or shed has to stay back. Paint the footprint before the estimate walk and measure to your survey pins. A shop floor that lands a foot inside a setback is a floor you may pour twice, so ask first.
Floors for sheds, shops and garages are priced by the square foot, $7 to $12 per sq ft on a reinforced pour. These sizes come straight from that range, and smaller shed pads hit a job minimum.
| Project | Size | Per sq ft | What it comes to |
|---|---|---|---|
| Equipment or tool shed pad | 10x20 (200 sq ft) | $7 to $12 | $1,400 to $2,400 |
| Workshop floor | 16x24 (384 sq ft) | $7 to $12 | $2,688 to $4,608 |
| Two-car garage floor | 24x24 (576 sq ft) | $7 to $12 | $4,032 to $6,912 |
| Barn-edge shop floor | 30x40 (1,200 sq ft) | $7 to $12 | $8,400 to $14,400 |
Stone base on poorly drained ground, thickened edges, a long run to the road and tear-out of an old pad change the total. Every price is confirmed in a free written estimate after we see the site.




